Carlton 2518 Manual del operador descargar pdf (Pagina 47)

18” DRUM MACHINE CONTROLS

20

DISCHARGE FLAP

There is an adjustable flap on the end of the

discharge chute. This flap is adjustable in

the vertical direction to help control the

height and distance of the chips being

discharged. To adjust this flap pull down on

the handle and rotate the flap up or down to

desired position. NEVER ADJUST THIS

FLAP WHILE THE CHIPPER IS IN

OPERATION OR WHILE THE CHIPPER

DRUM IS SPINNING!

HEIGHT ADJUSTABLE DISCHARGE

• Carlton Chippers are equipped with a

height adjustable discharge chute. This

allows the discharge chute to be adjusted

for different truck heights and discharge

angles.

• To adjust discharge chute height:

− Flip retainer up out of the way of the

crank handle

− Crank height adjuster to adjust chute

to desired height

− Return retainer to original position

securing crank handle

SWIVEL DISCHARGE

• Carlton Chippers are equipped with a

rotating discharge chute. To rotate the

chute to the desired position

1. Pull down and unlock the rotation

lock pin

2. Turn the crank handle to rotate the

discharge chute to desired position

3. Release the lock pin making sure it

engages in one of the lock locations

on the discharge chute securing the

chute in desired position.

ALWAYS MAKE SURE THE

DISCHARGE IS POINTED IN A CLEAR

DIRECTION FOR DISCHARGE OF

CHIPS

2

3

1

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 198 199

Comentarios a estos manuales

Sin comentarios