Carlton SP8018 TRX Especificaciones descargar pdf (Pagina 54)

SP8018 TRX SERVICING BELTS

• Use this same procedure to tighten loose

belts.

• DO NOT OVER TIGHTEN BELT;

OVERLY TIGHT BELTS WILL

CAUSE BEARING AND ENGINE

DAMAGE.

• Replace belts when worn or when

repeated adjustments are necessary.

Belts should never get so loose that all of

the adjustment capability is used.

• Replace guard cover and tighten all

bolts.

NEVER RUN MACHINE WITHOUT

GUARDS AND COVERS IN PLACE

AND BOLTS TIGHTENED.

GENERAL TENSIONING OF V-BELT DRIVES

A few simple rules about tensioning will satisfy most of your requirements.

1. The best tension for the V-belt drive is

the lowest tension at which the belt will

not slip under the highest load condition.

2. Check the tension on a new belt

frequently during the first day of

operation.

3. Thereafter, check the belt tension

periodically.

4. Too much tension shortens belt and

bearing life.

5. Keep belts and sheaves free from any

foreign material that may cause slippage.

6. If a V-belt slips, tighten it.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 100 101

Sin comentarios

Carlton SP8018 TRX Especificaciones Pagina 54