Carlton SP8018 TRX Especificaciones descargar pdf (Pagina 36)

100

101

SP8018 TRX MACHINE CONTROLS

CLUTCH ENGAGEMENT

(BELT SWITCH)

• ENGINE SPEED MUST BE AT IDLE

TO ENGAGE OR DISENGAGE THE

CLUTCH OR DAMAGE WILL

OCCUR. When engaging or

disengaging the clutch, hold the belt

switch long enough for the actuator to

fully move the assembly in or out.

Operating the machine without the

clutch fully engaged or disengaged will

cause slipping and is not warranted by J.

P. Carlton or the clutch manufacturer.

• Disengage the clutch by pushing and

holding the belt switch down long

enough for the actuator to fully move the

clutch arm and disengage the clutch.

The clutch is disengaged when the clutch

arm has been pushed forward and the bar

rests on the stop.

• Engage the clutch by pushing and

holding the belt switch up long enough

for the actuator to fully move the clutch

arm and engage the clutch. The clutch is

engaged when the pressure on the clutch

arm has released fully. There will be a

small distance between the actuator

assembly bar and the stop. The clutch

arm should have about 1/8” of play

when the clutch is engaged.

ACTUATOR FORWARD –

CLUTCH DISENGAGED

(NO SPACE BETWEEN

BAR AND STOP)

ACTUATOR BACK –

CLUTCH ENGAGED

(SPACE BETWEEN

BAR AND STOP)

ENGAGE/DISENGAGE

CLUTCH

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 100 101

Comentarios a estos manuales

Sin comentarios

Carlton SP8018 TRX Especificaciones Pagina 36

Comentarios a estos manuales

Relacionado con productos y manuales para Motor Carlton SP8018 TRX