Carlton 1712 Manual del operador descargar pdf (Pagina 118)

12”CHIPPER SERVICE

FEED WHEEL MOTOR

Return the feed wheel motor assembly to the

machine and tighten the bolts in the bushing.

Tighten each bolt a little at a time to pull the

coupling into place as straight as possible.

Try not to pull one side on faster than the

other or damage may occur to the bushing

and the coupling. When bolts are screwed

in all the way, torque the bolts to 35 ft. lbs.

Replace the rubber guard and bolt into place

using the two 3/8” bolts that were removed.

Tighten the bolts.

Reconnect the hydraulic hoses making sure

to connect them in the right order, see

markings made when hoses were removed.

If hoses are reversed, the feed wheels will

work in reverse. Change hoses if this

happens to make feed wheels turn correctly.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 164 165

Sin comentarios

Carlton 1712 Manual del operador Pagina 118